Rutland Wind Generator

HRDX, HRS Controllers & Regulators

Choose from two electronic regulators. Both models progressively slow down the rutland wind turbine when the batteries become full thus reducing long term wear and tear to the turbine. Connect between the windcharger, plus solar panels, where fitted, and the battery to prevent overcharge. Voltage regulation is pulse width modulation (PWM) type which slows the turbine down as the batteries become fully charged. All models are diode protected to allow charging from other sources to the same battery. Choose between the single bank HRS range or the HRDX Controller for twin battery banks.

You can check out our Charge Controllers here

Note: that voltage regulators should always be sited within 1.5m of the battery to minimise voltage losses and ensure accuracy of battery regulation.

Land Tower Kits, Mounting Poles
Rigging and Spare Parts

Install a Rutland wind charger and experience the convenience of fully charged batteries. Power for land and marine based applications from the gentlest breeze. Combine with solar panels for a balanced year round power supply. For more information about the combined wind and solar system click here...

Rutland Land Tower Rigging Kit

New for touring RVm caravans and motor homes! The convenience of an easy and quick to assemble mounting pole for the Rutland 503 for temporary installation. It's very easy to put up and take down.

Land Tower Kit comprises: 2 x 2m sections of galvanised steel tube with joiner and ground fixing spike. To be installed with users own support system or with the Tower Rigging Kit. Overall height 4 metres.

Tower Rigging Kit
The kit consists of two sets of 3 guy wires ready fitted to the tower attachments for upper and lower sections, shackles and ground anchors. The guys are polypropylene covered galvanised steel and all steel parts are plated for weather protection.

Note: Ground anchors supplied are for temporary installation on firm ground, other ground types may require alternative anchors to suit.

Mounting pole for land based systems – the 910-3 can be installed on land using a 6m length of 48mm outside diameter tube with 41 mm internal diameter. The mounting pole can be fixed into the ground or on pivot type base. A minimum height of 6m and of 4 guy wires is recommended.

Rutland 910 & 913 Land Tower Rigging Kit

Tower Kit - 910 and 913 wind turbines. Tower is 6.4m in length and comprises of (3 x 2.13m sections) of 48mm diameter galvanised steel tube ready drilled for assembly complete with joiners. Suitable for use with both with the Rutland 913 or FM910-3 wind turbines (with adaptor).

RUTLAND WIND TURBINE ACCESSORIES
Rutland 503	Part Number	Price (inc vat)
Rutland 503 Marine Mounting Kit	CA-12/01	CALL
Rutland 503 Stainless Steel Tube (1000mm)	CA-12/15	CALL
Rutland 503 Stainless Steel Tube (500mm)	CA-12/16	CALL
Rutland 503 Deck Fixing Brackets & Bolt	CA-12/23	CALL
Rutland 503 Caravan Tower Kit 4m	CA-12/12	CALL
Rutland 503 Caravan Tower Rigging Kit	CA-12/13	CALL
Rutland 913	Part Number	Price (inc vat)
Rutland 913 Marine Mounting Kit	CA-12/02	CALL
Rutland 913 Stainless Steel Tube (1200mm)	CA-12/03	CALL
Rutland 913 Stainless Steel Tube (600mm)	CA-12/04	CALL
Rutland 913 Deck Fixing Brackets & Bolt	CA-12/09	CALL
Rutland 910	Part Number	Price (inc vat)
Rutland 910 Land Tower Kit 6.4m	CA-12/08	CALL
Rutland 910 Land Tower Rigging Kit	CA-12/07	CALL
GENERAL ACCESSORIES	Part Number	Price (inc vat)
Clip-On Battery Terminals	901-030	CALL
2 Core Cable 2.5mm - (priced per metre)	902-015	CALL
3 Core Cable 1.5mm - (priced per metre)	902-016	CALL
Latching Plug & Socket 2-way	CA-11/02	CALL
Latching Plug & Socket 3-way	CA-11/03	CALL
Schottky Diode Kit 5A (up to 50W solar)	CA-11/01	CALL
Schottky Diode Kit 8A (50W solar or greater)	913-012	CALL

NOTE: WE ALSO SELL MANY OTHER SPARE PARTS FOR RUTLAND WIND TURBINES.
 

CALL US FOR MORE A COMPLETE LIST OF PARTS AVAILABLE.

 

BATTERIES

Deep cycle batteries should always be used for wind & solar charging. A good quality range of sealed AGM (absorbed glass matt) and gel batteries are available from Bright Green Energy. Check out our discover more here

CABLE & CONNECTORS
Cable thicknesses are determined by the run of cable distance. For cable runs up o 20m/60ft 2.5mm2 or13AWG cable is recommended to maximise electrical efficiencies. Permanent battery connectors are recommended.

SOLAR PANELS

Solar panels are a perfect complement to wind power, talk to WireFreeDirect about the BP Solar range of photovoltaic panels to give a seasonal balance of power to your system.

CHARGE CONTROLLERS

Charge controllers from STECA, TAROM, SOLSUM and FOX are available. Check out what we offer discover more here

INVERTERS

Inverters convert battery power to 230V for appliances such as laptops, TV’s etc. Check out what's available -> discover more here

TRIED AND TESTED APPLICATIONS

Remote Power, Off-Grid and Stand-Alone applications.

• Telecommunications at isolated location
• Remote broadband connections
• Roadside safety signs (see picture)
• Environmental monitoring e.g. water, air etc.
• Land based navigation lighting and radio equipment
• These and many other applications where grid power is unavailable.