RUTLAND 1803 Wind Turbine

Are you living off grid? Do you need power at a remote site?

Take advantage of the abundant power of the wind to generate your own free power using the Rutland FM1803 Furlmatic Windcharger.

The FM1803 needs only a light breeze to start generating power for charging batteries so you have the convenience of energy stored for whenever you need it.

Available in 12 volt or 24 volts. The battery power can be used for:

• Low energy lighting
• Pumps
• Refrigerators
• Telecommunications equipment
• Computers & TV’s
• 230V appliances can be operated through an inverter

It's new aerodynamic proportions are designed to deliver maximum efficiency from its 1.8m diameter 2-bladed turbine. The FM1803 has a a new aerodynamic styling and the latest generator technology to deliver nearly 40% more power without increasing the turbine size. In fact the weight has been reduced, but the FM1803 is still as robust and "heavy duty" as its predecessor.

Click here or on the image for more details

Rutland 910-3 Wind Turbine - Furlmatic

The Rutland FM910-3 combines the established Furlmatic robust mechanical design with their latest 3 phase generator technology to deliver better performance and greater reliability than ever before. Primarily designed for land based applications, the Rutland FM910-3 has been used worldwide to provide year round power generation.

• Furling tail system reduces speed in high winds.
• Peaks up to 200W pre-furling.
• Turbine diameter: 910mm
• Weight: 15Kg
• Packed Dimensions: 240 x 310 x 330mm
• Packed Weight: 17Kg

An HRS913 or HRDX Controller is recommended for use with the Rutland FM910-3 Furlmatic.  For more information on the HRDX controllers and voltage regulators click here..

Click here or on the image for more details

Rutland 504 Wind Turbine

Without doubt this latest model accumulates more energy than any other comparable wind generator available, you'll always see a Rutland spinning in the lightest of breezes! It's perfect for marine and land based applications.

• Low wind speed start up of just 5 knots
• Generates 90w @ 19 knots, 24w @ 10 knots and can deliver up to 300w
• One way only fit fine profile efficient aerofoil blades
• Three phase Rutland "unique" generator design
• Automatic thermostat protection in prolonged gales
• Modern, durable materials for reliability on the high seas
• No radiated interference - complies with EEC directive 89/336/EEC
• Powerful, efficient, robust.
• Ideal for cruising yachts and static caravans.
• Generates up to 300W
• Output: 7.5A @ 19 knots (12V system)
• Turbine dial: 910mm
• Weight: 10.5Kg

HRS913 or HRDX Regulator recommended.
More Detail Here

Packed Dimensions: 375x375x620mm.
Packed Weight: 13 Kg
Available in 12 or 24V versions

Rutland 504 Wind Turbine

This latest model follows the success of its predecessor the Rutland 503 with a number of enhancements including performance and styling.

• "Safety turbine" is a single injection moulding of 6 aerofoil blades protected by an outer ring.
• Trickle charges in wind speeds as low as 5 Knots
• Produces 25w in 19 Knots
• Produces over 60w, nominally 5A @ 12V in 50 Knots
• Stainless steel fasteners and marine grade materials
• Turbine diameter of 500mm
• Compact turning radius of just 225mm, great for when space is at a premium
• Latest design improvements - the Rutland 503 is more reliable and efficient than ever!
• No radiated interference - complies fully with BS EN5008-1 1992

Packed Dimensions: 550x550x260mm.
Packed Weight: 6 Kg

Actual tower with rigging

Tower Rigging Kit-910 & 913 wind turbines.
Complete with steel guys, shackles, turnbuckles, pole attachments, ground fixings for pole and guys.