Victron Inverter Chargers offer advanced features: 

• Pure Sine Wave Inverter
  • Operates and is compatible with sensitive electrical equipment.
  • Available from 700 Watts to 2500 Watt continuous power output.
  • High Peak Power Surge for starting heavy inductive loads.
• Compact
  • If space is a premium.
• Four Stage Microprocessor controlled Battery Charger
  • Always provides the optimum charge for your batteries. 
  • Always looks after your batteries even when batteries are left unattended for long periods of time. 
• Automatic Power Transfer Switching (16 or 30 Amp) providing seamless and uninterrupted power regardless of loss of a power source.
• PowerAssist © - the ability to utilise supplementary power available from a generator or shore power, from the batteries to 'assist' during periods of high demand.
  • PowerAssist © increases efficiency when using a generator thus enabling use of a smaller generator than would otherwise be needed.
  • PowerAssist © automatically switches between inverter, generator and shore power when required. 
• Virtual Switch - programmable switch that can open or close a circuits that can be used start or stop a generator with an auto start facility.

Keep track of your power usage and have full control of your system through simple, easy to understand displays and controls.

Use electrical devices the same way as home whenever and wherever you are. No power shortages, no power interruptions and a minimum of interaction required.

If you are using a Pheonix Multiplus on a boat then read through "Achieving the Impossible" or Taking control of shore power with the Phoenix Multi/MultiPlus

All Victron products are supplied with a 2 year worldwide warranty.  You can rely on Bright Green Energy for professional service and advice wherever you are located.

---

VICTRON INVERTER CHARGERS - MODELS AVAILABLE

Part Number	Description	Dimensions h x w x d	Price Inc VAT	Download
12V Inverter Charger
PIN012181100	12V-180W IEC Outlet	72 x 132 x 200	£
PIN012181200	12V-180W Schuko Outlet	72 x 132 x 200	£
PIN012351100	12V-350W - IEC Outlet	72 x 155 x 237	£
PIN012351200	12V-350W Schuko Outlet	72 x 155 x 237	£
PIN012651100	12V-650W IEC Outlet	72 x 180 x 295	£
PIN012751200	12V-750W Schuko Outlet	72 x 180 x 295	£
Technical Datasheet				more info
Installation and User Manual				more info
System Brochure				more info
24V Inverters
PIN024181100	24V-180W IEC Outlet	72 x 132 x 200	£
PIN024181200	24V-180W Schuko Outlet	72 x 132 x 200	£
PIN024351100	24V-350 IEC outlet	72 x 155 x 237	£
PIN024351200	24V-350 Schuko outlet	72 x 155 x 237	£
PIN024751100	24V-750 IEC outlet	72 x 180 x 295	£
PIN024751200	24V-750 Schuko outlet	72 x 180 x 295	£
PIN024801000	24V-800 IEC outlet	107 x 187 x 227	£
Technical Datasheet				more info
Installation and User Manual
System Brochure				more info
Phoenix "C" Inverter
CIN012122000	C 12V-1200	375 x 214 x 110	£
CIN012162000	C 12V-1600	375 x 214 x 110	£
PIN012252000	12V-3000**	362 x 258 x 218	£
CIN024122000	24V-1200	375 x 214 x 110	£
CIN024162000	24V-1600	375 x 214 x 110	£
PIN024302000	24V-3000**	362 x 258 x 218	£
Technical Datasheet				more info
Installation and User Manual				more info
System Brochure				more info
48V Inverters
PIN048221000	48V-220 IEC outlet	73 x 110 x 210	£
PIN048351100	48V-350 IEC outlet	72 x 155 x 237	£
PIN048751100	48V-750 IEC outlet	72 x 180 x 295	£
PIN048801000	48V-800 IEC outlet	107 x 187 x 227	£
PIN048302000	48V-3000W	362 x 258 x 218	£
Technical Datasheet				more info
Installation and User Manual
System Brochure				more info
ACCESSORIES
	Battery Alarm An excessively high or low battery voltage is indicated by an audible and visual alarm, and a relay for remote signalling.
	Phoenix Inverter Control (PIV) This panel is intendedfor the modelsequipped with aRS-485 data port. It can also be used on a Phoenix Multi when an automatic transfer switch but no charger function is desired. The brightness of the LED’s is automatically reduced during night time.
	Computer controlled operation and monitoring (Victron Interface MK2) All models rated at 1200 VA or more are ready to communicate with a computer through a RS-485 data port. All you need to link to your PC and be able to set and read out all parameters is the data link as shown and software available on our website. (see also ‘A guide to VEConfigure’) Moreover, all Victron Energy products equipped with an RS-485 data port can easily be integrated in VE.Net, the new power control network of Victron Energy, or in other computerised monitoring and control systems.
	BMV-501 Battery Monitor The BMV – 501 Battery Monitor features an advanced microprocessor control system combined with high resolution measuring systems for battery voltage and charge/dischargecurrent. Besides this, the software includes complex calculation algorithms, like Peukert’s formula, to exactly determine the state of charge of the battery. The BMV – 501 selectively displays battery voltage, current, consumed Ah or time to go. The monitor also stores a host of data regarding performance and use of the battery.

NEW: Quattro Inverter Chargers - 12 / 24  and 48 volt 5kVA

The Quattro now has Two AC inputs with an integrated transfer switch and can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source.

Two AC Outputs
The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

Unique PowerAssist feature
The Quattro will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Virtually unlimited power thanks to parallel operation
Up to 6 Quattro’s can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible.

Phoenix MultiPlus Inverter Charger

The Phoenix Multiplus combines all the features of a pure sine wave inverter and charger in one compact enclosure

Features include:

UPS functionality: seamless transfer from external AC to inverter supply.

Unique AC power management system will prevent overload of a limited AC source.

As the AC load increases on your shore/generator supply, battery charging will automatically be reduced when otherwise an overload would occur.  A further increase in load to above the limit of the shore/generator supply and the Inverter will boost the output of a generator or shore side supply with power taken from the battery. Typically where peak power is often required only for a limited period.

The Phoenix MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery.

Models range from 1200VA to 3000VA per module.
Scalable: any number of units can be paralleled in single phase, split phase and three phase configuration. more ...

Each unit will switch 16A AC from input to output. This is normally sufficient as most marina supplies are limited to 16A. For larger vessels with access to 30A shore supplies, the relay version should be used as these have uprated relays to carry 30A AC through the unit.

For correct Shore/Generator supply current limiting operation, the optional MultiPlus Control panel and a UTP cable is required. Call for more details

Phoenix EasyPlus Inverter Charger

The Phoenix EasyPlus is a multifunctional energy system consisting of a powerful sinewave inverter, a sophisticated battery charger, a high speed AC transfer switch and AC distribution in a single light weight and compact enclosure.

The system has been designed for those who want to enjoy the comfort and freedom of a complete energy system without spending time on the installation of separate components and difficult technical procedures.

• 12 Volt 1600VA sine wave inverter (3000 Watt peak power)
• 70A charger incl. 4A trickle charge for start battery
• Unique PowerAssist© technology protects the shore or generator from being overloaded by adding extra inverter power when needed
• 4 stage adaptive charge technology for quick and accurate battery charging
• RCD (30mA/16A) on AC output
• Two AC output sockets protected by 16A automatic circuit breakers for optimum safety
• Second AC output active only when shore power is available
• No-break system: uninterrupted switching between shore/generator and inverter
• Battery cables and remote panel included
• 24 Month worldwide warranty

MORE FEATURES

Extra start-up power

A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances.

Virtually unlimited power thanks to parallel and 3-phase operation capability

Up to 6 units Phoenix 24/3000 can operate in parallel to achieve higher power output. Six 24/3000 units, for example, will provide 15 kW / 18 kVA output power. Operation in 3-phase configuration is also possible. (Please request VE.Bus enabled units for best 3 phase performance)

To transfer the load to another AC source: the automatic transfer switch

If an automatic transfer switch is required on models rated at 800 VA or more, we recommend to using the Phoenix Multi instead. The switch is included in these products and the charger function of the Multi can be disabled. For our lower power models we recommend the use of our Filax Automatic Transfer Switch. Computers and other electronic equipment will continue to operate without disruption because both the Filax and the Phoenix Multi feature a very short switchover time (less than 20 milliseconds).

Computer interface

All models rated at 1200 VA or more have a RS-485 computer interface. All you need to connect to your PC is our data link MK2 (see under accessories). This data link takes care of galvanic isolation between the inverter and the computer, and converts from RS-485 to RS-232. Together with the VEConfigure software, which can be downloaded free of charge from our website www.victronenergy.com, all parameters of the inverters can be customised. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator.

The inverters can also be connected to VENet, the new power control network of Victron Energy, or to other computerised monitoring and control systems.

New applications of high power inverters

The possibilities of paralleled high power inverters are truly amazing. For ideas, examples and battery capacity calculations please refer to their book “Electricity on board” (available free of charge from Victron Energy and downloadable from www.victronenergy.com).